top of page

Ferrari 16M Door Panels

 

Upon receiving the 3D scanned files of the two door panels, the first order of business was to rebuild an area of the driver side panel to remove a feature the client did not want:

Ferrari Door Panel
Panels_06_Final-2k.png

 

 

The top edge of the passenger side panel had an area that was deformed inward, which is clearly seen in the 3D scan:

Panels_32_Final-2k.png

 

 

 

So the next step was to fix this area in CAD by creating new surfaces that flowed smoothly:

Panels_30-Final-2k.png

With the two panels now fixed in CAD, the next phase was to integrate custom speaker pods. To begin that process we carefully measured and 3D modeled the customer chosen woofer and tweeter (GrabCAD link: https://grabcad.com/library/morel-virtus-nano-602-1):

Morel_01_Sig.png
Morel_Virtus_Nano_03_Final-2k.png

 

 

 

With that done, we now started on the most complicated step of this entire project, which was modelling the speaker pods. The angle of the drivers had to be correct for proper acoustics and we also had to be mindful of the tight clearance behind the panel:

Panels_72.png
Panels_78.png

 

 

 

Product renders in carbon fiber and black suede:

Panels_16M_11_Final-2k.png
Panels_16M_12_Final-2k.png

 

 

 

Thermoforming molds were CNC machined from layered MDF:

20181126_165121_EDIT.jpg
20181127_111530.jpg

 

 

 

With molds in hand the client then had the raw panels thermoformed:

Resized_20181218_144736_4603(1).jpeg
Resized_20181229_155737_9423.jpeg

 

 

 

Passenger panel wrapped with black suede and installed:

Resized_Screenshot_20190120-153729_EDIT.

 

 

 

Link to product: https://scuderiaaudio.com/product/kick-panels/

bottom of page